OpenHD
GitHubTelegramDonate
2.0
2.0
  • Introduction
  • General
    • Features
    • Getting Started
    • FAQ
    • Contributing
  • Hardware
    • Wiring
    • WiFi Adapters
    • Supported SBC's
    • Cameras
    • Displays
    • Antennas
    • Audio
  • Software Setup
    • Telemetry and OSD
    • SmartSync
  • RC Control
    • General
    • RC over MAVLink
    • RC over Serial
  • Advanced Setup
    • Bidirectional Telemetry
    • USB Tethering
    • WiFi Hotspot
    • Ethernet Hotspot
    • Ground Recording
    • Using only a USB Camera
    • Using only an IP Camera
    • Using an IP or USB Camera as second camera
    • Bandwidth switching
    • LTE Connection
    • Ground Power Monitoring
  • Ground Station Software
    • QOpen.HD (recommended)
    • Mission Planner
    • QGroundControl
    • Tower
    • FPV_VR
    • GStreamer
    • FishingFanCam
    • RaspberryPi Camera Viewer
  • Developer Corner
    • The Open.HD Ecosystem
    • Making a Release
    • Update packages on a Pi
    • Change packet source on a Pi
    • Building an Image
    • Essentials
    • QOpenhd Tips
Powered by GitBook
On this page
  • Microphones
  • Audio out on Ground

Was this helpful?

Export as PDF
  1. Hardware

Audio

PreviousAntennasNextTelemetry and OSD

Last updated 2 years ago

Was this helpful?

Not everybody uses this feature, but in some use cases it might be necessary to transmit Audio from the Air unit to the Ground unit as well. This is disabled by default as there are many options that can not be auto detected.

Microphones

Currently 3 tested options

  • A Linux compatible 3.5mm audio in/out USB stick with separate CCTV style 5v or 12v powered mic. (best option)

  • The small all in one mic (smallest but poor/very low volume)

  • Logitech C920 webcam (great audio input/output and if the webcam part of the video feed can be eventually matured it should be plug and play for video/audio)

Audio out on Ground

For hardware you can use the 3.5 jack, or HDMI output on the ground station. Please make the following modifications in the openhd-settings-1.txt file in the bootpartition of the SD card for both Air and Ground unit.

DefaultAudioOut=2 #0 Auto, 1 Analog, 2 HDMI
IsAudioTransferEnabled=1
MicBoost=75
SpeakersLevel=75
The currently supported microphones