# OpenHD ## 2.0 - [Introduction - READ FIRST](https://openhd.gitbook.io/open-hd/master/readme.md) - [Features](https://openhd.gitbook.io/open-hd/master/general/features.md) - [Getting Started](https://openhd.gitbook.io/open-hd/master/general/getting-started.md): Open.HD for Dummies (for Marvin Lange) - [FAQ](https://openhd.gitbook.io/open-hd/master/general/faq.md) - [Contributing](https://openhd.gitbook.io/open-hd/master/general/contributing.md) - [Wiring](https://openhd.gitbook.io/open-hd/master/hardware/wiring.md) - [WiFi Adapters](https://openhd.gitbook.io/open-hd/master/hardware/wifi-adapters.md) - [Supported SBC's](https://openhd.gitbook.io/open-hd/master/hardware/sbcs.md) - [Cameras](https://openhd.gitbook.io/open-hd/master/hardware/cameras.md) - [Displays](https://openhd.gitbook.io/open-hd/master/hardware/displays.md) - [Antennas](https://openhd.gitbook.io/open-hd/master/hardware/antennas.md) - [Audio](https://openhd.gitbook.io/open-hd/master/hardware/audio.md) - [Telemetry and OSD](https://openhd.gitbook.io/open-hd/master/software-setup/telemetry-and-osd.md) - [SmartSync](https://openhd.gitbook.io/open-hd/master/software-setup/smartsync.md) - [General](https://openhd.gitbook.io/open-hd/master/rc-control/general.md) - [RC over MAVLink](https://openhd.gitbook.io/open-hd/master/rc-control/rc-over-mavlink.md) - [RC over Serial](https://openhd.gitbook.io/open-hd/master/rc-control/rc-over-serial.md) - [Bidirectional Telemetry](https://openhd.gitbook.io/open-hd/master/advanced-setup/bidirectional-telemetry.md) - [USB Tethering](https://openhd.gitbook.io/open-hd/master/advanced-setup/usb-tethering.md) - [WiFi Hotspot](https://openhd.gitbook.io/open-hd/master/advanced-setup/wifi-hotspot.md) - [Ethernet Hotspot](https://openhd.gitbook.io/open-hd/master/advanced-setup/ethernet-hotspot.md) - [Ground Recording](https://openhd.gitbook.io/open-hd/master/advanced-setup/ground-recording.md) - [Using only a USB Camera](https://openhd.gitbook.io/open-hd/master/advanced-setup/using-only-a-usb-camera.md) - [Using only an IP Camera](https://openhd.gitbook.io/open-hd/master/advanced-setup/using-only-an-ip-camera.md) - [Using an IP or USB Camera as second camera](https://openhd.gitbook.io/open-hd/master/advanced-setup/using-an-ip-or-usb-camera-as-second-camera.md) - [Bandwidth switching](https://openhd.gitbook.io/open-hd/master/advanced-setup/bandwidth-switching.md) - [LTE Connection](https://openhd.gitbook.io/open-hd/master/advanced-setup/lte-connection.md) - [Ground Power Monitoring](https://openhd.gitbook.io/open-hd/master/advanced-setup/ground-power-monitoring.md) - [QOpen.HD (recommended)](https://openhd.gitbook.io/open-hd/master/ground-station-software/qopen.hd-recommended.md): This page describes the QOpen.HD application - [Mission Planner](https://openhd.gitbook.io/open-hd/master/ground-station-software/mission-planner.md) - [QGroundControl](https://openhd.gitbook.io/open-hd/master/ground-station-software/qgroundcontrol.md) - [Tower](https://openhd.gitbook.io/open-hd/master/ground-station-software/tower.md) - [FPV\_VR](https://openhd.gitbook.io/open-hd/master/ground-station-software/fpv_vr.md) - [GStreamer](https://openhd.gitbook.io/open-hd/master/ground-station-software/gstreamer.md) - [FishingFanCam](https://openhd.gitbook.io/open-hd/master/ground-station-software/fishingfancam.md) - [RaspberryPi Camera Viewer](https://openhd.gitbook.io/open-hd/master/ground-station-software/raspberrypi-camera-viewer.md) - [The Open.HD Ecosystem](https://openhd.gitbook.io/open-hd/master/developer-corner/the-openhd-ecosystem.md) - [Making a Release](https://openhd.gitbook.io/open-hd/master/developer-corner/making-a-release.md) - [Update packages on a Pi](https://openhd.gitbook.io/open-hd/master/developer-corner/updating-package-on-a-pi.md) - [Change packet source on a Pi](https://openhd.gitbook.io/open-hd/master/developer-corner/change-packet-source-on-a-pi.md) - [Building an Image](https://openhd.gitbook.io/open-hd/master/developer-corner/building-an-image.md) - [Essentials](https://openhd.gitbook.io/open-hd/master/developer-corner/essentials.md) - [QOpenhd Tips](https://openhd.gitbook.io/open-hd/master/developer-corner/qopenhd-and-custom-mavlink.md) ## evo - [Introduction - READ FIRST](https://openhd.gitbook.io/open-hd/introduction.md) - [Features](https://openhd.gitbook.io/open-hd/general/features.md) - [Troubleshooting](https://openhd.gitbook.io/open-hd/general/troubleshooting.md) - [General-FAQ](https://openhd.gitbook.io/open-hd/general/troubleshooting/faq.md) - [Software-FAQ](https://openhd.gitbook.io/open-hd/general/troubleshooting/software-faq.md) - [Contributing](https://openhd.gitbook.io/open-hd/general/contributing.md) - [Team](https://openhd.gitbook.io/open-hd/general/team.md) - [Installation Guide](https://openhd.gitbook.io/open-hd/installation-guide.md): Flashing Your Air and Ground Units with OpenHD Firmware - [First Time Setup](https://openhd.gitbook.io/open-hd/hardware/first-time-setup.md) - [SBC's](https://openhd.gitbook.io/open-hd/hardware/sbcs.md) - [Raspberry](https://openhd.gitbook.io/open-hd/hardware/sbcs/raspberry.md) - [Ochin CM4 Carrier](https://openhd.gitbook.io/open-hd/hardware/sbcs/raspberry/ochin.md) - [Ochin CM4 Carrier v2](https://openhd.gitbook.io/open-hd/hardware/sbcs/raspberry/ochinv2.md) - [X86](https://openhd.gitbook.io/open-hd/hardware/sbcs/x86.md) - [Radxa](https://openhd.gitbook.io/open-hd/hardware/sbcs/radxa.md) - [Custom Hardware](https://openhd.gitbook.io/open-hd/hardware/sbcs/custom-hardware.md) - [Discontinued Hardware](https://openhd.gitbook.io/open-hd/hardware/sbcs/discontinued.md) - [Jetson](https://openhd.gitbook.io/open-hd/hardware/sbcs/discontinued/jetson.md) - [Cameras](https://openhd.gitbook.io/open-hd/hardware/cameras.md) - [Raspberry Pi CSI](https://openhd.gitbook.io/open-hd/hardware/cameras/raspberry-cameras.md) - [Radxa Rock5](https://openhd.gitbook.io/open-hd/hardware/cameras/radxa-cameras.md) - [USB Cameras](https://openhd.gitbook.io/open-hd/hardware/cameras/usb-camera.md) - [HDMI Cameras](https://openhd.gitbook.io/open-hd/hardware/cameras/rpi-hdmi-to-csi.md) - [RPI HDMI to CSI](https://openhd.gitbook.io/open-hd/hardware/cameras/rpi-hdmi-to-csi/hdmi-cameras-rpi.md) - [IP Cameras](https://openhd.gitbook.io/open-hd/hardware/cameras/ip-cameras.md) - [Special Purpose Cameras](https://openhd.gitbook.io/open-hd/hardware/cameras/special-camera.md) - [Custom Hardware](https://openhd.gitbook.io/open-hd/hardware/cameras/custom-cameras.md) - [WiFi Adapters](https://openhd.gitbook.io/open-hd/hardware/wifi-adapters.md): WiFi Adapters for OpenHD Evo - [Antennas](https://openhd.gitbook.io/open-hd/hardware/antennas.md) - [FlightControllers](https://openhd.gitbook.io/open-hd/hardware/flightcontrollers.md) - [Wiring](https://openhd.gitbook.io/open-hd/hardware/wiring.md) - [Displays](https://openhd.gitbook.io/open-hd/hardware/displays.md) - [Hardware.conf](https://openhd.gitbook.io/open-hd/hardware/hardware.conf.md) - [Inav](https://openhd.gitbook.io/open-hd/software-setup/inav.md) - [Ardupilot](https://openhd.gitbook.io/open-hd/software-setup/ardupilot.md) - [Betaflight](https://openhd.gitbook.io/open-hd/software-setup/betaflight.md) - [Recording](https://openhd.gitbook.io/open-hd/software-setup/recording.md) - [TX-Power](https://openhd.gitbook.io/open-hd/software-setup/tx-power.md) - [MCS-Index](https://openhd.gitbook.io/open-hd/software-setup/mcs-via-rc.md) - [Joystick RC](https://openhd.gitbook.io/open-hd/software-setup/joystick-rc.md): Setting Up Joystick RC Control - [Camera Settings](https://openhd.gitbook.io/open-hd/software-setup/camera-settings.md): Changing Camera Settings in OpenHD Evo - [Tethering](https://openhd.gitbook.io/open-hd/software-setup/tethering.md) - [Ethernet](https://openhd.gitbook.io/open-hd/software-setup/tethering/ethernet-hotspot.md) - [Wifi-Hotspot](https://openhd.gitbook.io/open-hd/software-setup/tethering/wifi-hotspot.md): Using the Wi-Fi Hotspot in OpenHD Evo - [Variable Bitrate](https://openhd.gitbook.io/open-hd/software-setup/variable-bitrate.md): Understanding Variable Bitrate in OpenHD Evo - [Air recording](https://openhd.gitbook.io/open-hd/advanced-setup/air-recording.md): Guide for Air Recording without OSD for YouTube or similar platforms. - [Dual Camera](https://openhd.gitbook.io/open-hd/advanced-setup/dual-camera.md): Dual camera setup process - [Ground power monitoring](https://openhd.gitbook.io/open-hd/advanced-setup/ground-power-monitoring.md) - [Joystick](https://openhd.gitbook.io/open-hd/advanced-setup/joystick.md) - [QOpenHD](https://openhd.gitbook.io/open-hd/ground-station-software/qopenhd.md) - [QOpenHD OSD backup](https://openhd.gitbook.io/open-hd/ground-station-software/qopenhd/qopenhd-osd-backup.md): Backup your QOpenHD OSD Settings - [QGroundControl](https://openhd.gitbook.io/open-hd/ground-station-software/qgroundcontrol.md) - [MissionPlanner](https://openhd.gitbook.io/open-hd/ground-station-software/mission-planner.md) - [Porting OpenHD](https://openhd.gitbook.io/open-hd/developers-corner/porting.md) --- # Agent Instructions This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com. ## Querying This Documentation If you need additional information, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on a page URL with the `ask` query parameter: ``` GET https://openhd.gitbook.io/open-hd/introduction.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.